§ 311-3.01. Application form.

The application for a comprehensive permit shall consist of a completed comprehensive permit application form utilized by the Board which includes the following:

A. 

Preliminary site development plans showing the locations and outlines of proposed buildings; the proposed locations, general dimensions and materials for streets, drives, parking areas, walks and paved areas; and proposed landscaping improvements and open areas within the site. An applicant proposing to construct or rehabilitate four or fewer units may submit a sketch of the matters in 760 CMR 56.05(2)(a) and (c) which need not have an architect's signature. All projects of five or more units must have site development plans prepared by a registered architect or engineer;

B. 

A report on existing site conditions and a summary of conditions in the surrounding areas, showing the location and nature of existing buildings, existing street elevations, traffic patterns and character of open areas, if any, in the neighborhood. This submission may be combined with that required in § 311-3.01(A) above;

C. 

Preliminary, scaled, architectural drawings. For each building the drawings shall be prepared by a registered architect, and shall include typical floor plans, typical elevations, and sections, and shall identify construction type and exterior finishes;

D. 

A tabulation of proposed buildings by type, size (number of bedrooms, floor area) and ground coverage, and a summary showing the percentage of the tract to be occupied by buildings, by parking and other paved vehicular areas, and by open areas;

E. 

Wwhere a subdivision of land is involved, a preliminary subdivision plan;

F. 

A preliminary utilities plan showing the proposed location and types of sewage, drainage, and water facilities, including hydrants;

G. 

The project eligibility letter, showing that the applicant fulfills the requirements of 760 CMR 56.04(1); and

H. 

A list of requested waivers.